Assembly Instructions for Dual ChemRxnHub™ Reactor Systems
1) Place the reactor stand on a sturdy bench with the bottom plate facing toward the front. • Loosen knobs on the right and left using 2 hands of the
2) Insert the reactor clamps into the adjusting plate. • Make sure that the beveled end is up on the clamp and the knob is facing to the left. • Pla
4) Assemble the stirrer shaft and agitators. • Loosen and remove screw and ring on the stirrer shaft. • Fit the ground end of shaft into 5” agitator.
7) Install the baffle and baffle adapter. • Unscrew nut and be careful not to lose the 2 ferrules underneath. • Place the round end of the baffle in
10) Install the lower vessel support. (2L & 5L Capacity Only) • Loosen the locking handle. • With the rubber side of support facing up, place
Kommentare zu diesen Handbüchern